Publish Time: 2021-10-19 Origin: Site
The fault classification of the Winding and binding machine is nothing more than electrical, mechanical, transmission, and pneumatic. Among them, the electrical part is divided into strong and weak currents, and the manufacturers of cable winding and binding machines generally consider giving alarms to vulnerable and faulty parts in the design, use, and maintenance of their CNC systems. After the alarm circuit works, on the one hand, it gives out sound, light, and other alarm information on the display or operation panel, and on the other hand, it sends out protective instructions. Power off the system or stop working to ensure safety and prevent the expansion of faults. Next, let's take a look at the maintenance methods of the Winding and binding machine in detail. Here are some answers.
Here is the content list:
Preparation of trial run program
Make good use of all adjustable parts
Spare parts replacement method
Environmental quality improvement act
Compiling a reasonable program and running it successfully is the basis for determining the integrity of the Winding and binding machine system. Incorrect setting of some winding parameters may cause system failures or invalid functions, sometimes caused by user program errors. In case of a shutdown, it can be checked by compiling a test run program to correct the errors of the user program to ensure its normal operation.
The adjustment of adjustable parts such as the winding tension, screen voltage, and the starting position of the wire rack is an easy and simple but effective method in maintenance. By adjusting the adjustable parts, some innocuous faults can be corrected. For example, if a company repairs a Winding and binding machine that has been used for many years, the screen of the system display screen is dim, and the screen power supply voltage is adjusted to be normal.
In the maintenance of the Winding and binding machine, replace the suspected faulty parts with good spare parts. After the maintenance personnel has judged the cause of the fault, this method can be used to quickly diagnose the scope of the fault and quickly put the Winding and binding machine into normal operation. The broken parts are returned for repair, which is the most common troubleshooting method.
For some very strange Winding and binding machine failures, if you can't find the cause by using the exclusion and replacement method, you often need to start with the surrounding environment. The environment is generally divided into two types, power supply, and space. The power supply can be improved by using a regulated and isolated power supply to improve the fluctuations from the power supply. For some high-frequency interference from the power supply, the capacitor filtering method can be used. These preventive measures can be used to reduce the faults caused by the power supply, increase and check whether the grounding is good and it is also very necessary.
For more Winding and binding machine-related questions, please consult us. Our official website is https://www.3qmachine.com/products.html.
Wire Stripping Machine Terminal Crimping Machine Pipe Cutter Machine Winding And Binding Machine Wire Cutting Machine Twisting And Stripping Machine Stripper Bending Machine Soldering Machine Pneumatic Crimping Tools & Machine Scrap Copper Wire Stripping Machine Labeling Machine Manual Nameplate Marking Machine Machine Mold & Blade & Accessories